How to make a Vaporizer from a Light bulb

If you want to make a diy vaporizer, here is one of our recipes for that.

Gather your supplies. For this vaporizer, you will require a clear light bulb (100 watts is better, and don't play one that is painted white inside), a sharp knife, pliers, glass straws or tubes, tape, scissors, and the cap from the 500ml bottle.

Cut the finish off the light bulb. Take your knife to take off the metal tip of the light bulb where you'd typically screw it into the socket. Make an effort to cut it smoothly to avoid rough edges.


Remove the filament. Utilize the pliers to pull the filament out from the bulb. The filament is the metal wire that lights up the bulb when turned on. When you finish this, you ought to be left with an empty bulb.

Fit the cap over the finish of the bulb. Put the plastic bottle cap over the finish of the bulb. If it is too big, work with a little tape inside to make padding therefore it fits snuggly.


Cut two holes in the bottle cap. You'll insert two straws or glass tubes into these holes, so measure to size. Use your knife to cut the holes into the cap. When you have one, you can even use a routine to quickly create the holes.

Put the vaporizer together. Place the straws/tubes into the cap and return the cap to the room over the metal in the light bulb. An individual will be sure it all fits, you are able to remove the cap to incorporate your chosen substance to the interior of the light bulb. Place a flame underneath the root of the bulb to produce the vapor which is often inhaled through the straws